Magic Castle Power Pack Light Up Card

I was so excited to be asked to participate in a MEGA blog hop using the new Power Pack Kit by Pearblossom Press. The Power Pack is a tiny switch with a battery that lights up small LED stickers to add lights to a card or other projects. Be sure to read to the end of this post to find out the special offers and give aways from Pearblossom Press.

Magic Castle Fireworks Card

With so many possible applications, it took some time but I decided to make something sparkly like fireworks over a magic castle. I started with a 5″ x 5″ piece of dark blue card stock and the dandelion die from my Tiny Nature die set by Sizzix. As I was designing this die I kept thinking that it could be used as fireworks so here it is! I die cut from the back of the card stock to avoid the natural metal imprint appearing in the final design. I started with the 5″ x 5″ card stock because I wanted to give myself room later to rotate the die cut piece to position the fireworks where I wanted them.
die cut2

I die cut a castle shape from the Tiny Travel Globe die set by Tim Holtz and used it to determine the placement of the fireworks. Next, I used the oval die from my Journaling Cards die set as a template and drew a pencil line about 1/4″ away from the edge of the die.

I cut out the dark blue oval shape and set it aside. For the lighter blue card front, I trimmed a piece of card stock to 3 3/4″ x 5″ and used the same oval die to die cut the opening. The top of the oval window is 1/2″ from the top of the rectangle.

I adhered the dark blue oval to the back of the card front. The white card base is folded to 4 1/4″ x 5 1/2″. Here you can see the Power Pack Kit. It comes with 3 power packs, batteries, copper tape and 3 LED stickers for $15.99 USD. I only used one Power Pack battery and two LEDs for my project.
Kit starting

I positioned the blue card front on the white card base and marked where the LED stickers and Power Pack will be placed. I also marked the positive and negative sides of the Power Pack. You can see a little + and – on the triangle LED stickers as well. I used red tape to securely hold the Power Pack to my card front.button tape

Once the Power Pack was secured, I drew a line to indicate where to run my copper wire. Remember, positive to positive and negative to negative and that little rectangle to the side of the LED is a resistor so don’t let your copper tape touch that. Now I’m ready to lay some copper tape!
pencil mapping

Tips: Make sure the copper tape has good contact everywhere. Keep the path of the tape as short as possible. The LED stickers can go on top of or below the tape but I had better luck placing the LEDs on top of the tape as shown. Yay! It works!

Now to finish off the card front; I adhered a small piece of clear acetate behind the fireworks and added a drop of Alcohol Ink in Cranberry and Sunshine Yellow. I didn’t cover the entire area with color so that the edges would shine clear when finished.
Alcohol ink

I used black Sizzix Foam adhesive sheets behind the card front. The foam adhesive is 1/8″ thick so one layer worked perfectly to raise the card front above the Power Pack button. I adhered the card front to the card base being careful to align the LEDs behind the fireworks.
card front

I made the tiny castle using gray, pink, aqua and gold card stock and adhered it in place on the card front. I added rhinestones for additional sparkle. To indicate where to press the button, I placed a piece of shiny washi tape and adhered another firework out of gold card stock to mark the button.
Magic Castle Fireworks dark

Pearblossom Press logo

Visit Pearblossom Press HERE to purchase your own Power Packs. The Power Packs are available three ways:

  • Power Pack Kit (set of 3 power packs, batteries, copper tape, and 3 LED stickers) retail $15.99 USD
  • Power Pack (3 units) (3 power packs with batteries only – perfect for people who already have Chibi kits but don’t want to make paper switches and battery holders) retail $9.99 USD
  • Power Pack (single unit) (1 power pack with a battery) retail 4.99 USD

And if you want more detailed wiring instructions visit Amanda’s tutorial HERE. Plus Pearblossom press is offering free shipping on orders over $9 to customers in the US, or $5 off International shipping from April 27th through May 11th, 2019. They will also be giving away Power Pack Kits to 10 randomly selected winners that comment on the blog post by 11:59pm PST on May 4th, 2019. Visit Pearblossom Press for complete details.

Hope you enjoyed this light up card. Please visit all of the Power Pack MEGA blog hop participants below to see the spark of magic in these lights.

Pear Blossom Press
Koren Wiskman
Lynda Kanase  {you are here}
Jessica Shier
Lynnea Hollendonner
Kim Brown-Blyleven
Niccole Kulig
Annalisa Gibson
Marie Heiderscheit
Beth Duff
Mary Polanco
Rachel Winn
Marcia Caradinta
Katrina Bertelsen
Daisie Hanson
Jessica Francisco
Samantha Klaebe
Jessica McAfee
Lesley Oman
Tania Cordie

Shop This Project

Affiliate Links: By clicking on and purchasing through my links, a small portion of the sale price goes towards supporting this site at no additional cost to you. Thank you for your support.

663590 tiny nature664182 Tiny Travel Globe 661969_Journaling_cardsSizzix foam adhesive sheetsAlcohol Ink CranberryAlcohol Ink Sunshine Yellow1-2 red tape

Lynda Kanase Sizzix Light up Card pin

About Lynda Kanase

Founder and Chief Designer of i-crafter Creative Products and current Crafter, Maker, Stitcher, Scrapper, Graphic Designer, Illustrator, Instructor, Anglophile, Dog lover and Mom trying to make the world prettier, one project at a time. Please join me on this creative adventure.

45 Responses

  1. pearblossompress

    Wow Lynda, this is an adorable card! I love the way you added color to the lights with alcohol ink. And re-purposing the dandelion die as fireworks – genius!

    Liked by 1 person

      1. Raga Senthil

        Aww..what a cute make. Clever use of dandelion as fireworks! I’m literally swooning over this magical card Lynda. I adore this card so much. 😍😍🤞


  2. April Driggers

    This is PERFECT for a fireworks card!!! And the little castle — get out — it’s so adorable!!! The tutorial is great. I just went and bought a three pack. I can’t wait to try these.

    Liked by 1 person

  3. Mary Samuelson

    OK, I never would have thought of using alcohol in to color the acetate, but your project is amazing because of this extra step to make the fireworks really pop when lit up

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s